Orlando Custom Molding
Every owner just wants the best for their homes or offices to maximize their practical application and aesthetic feature. As much as possible, even the materials should be of high-quality for further enhancement. So, when it comes to constructing or renovating buildings for residential or commercial use, one feature being considered is wall trim styles that give a smooth transition from either your wall to the ceiling or the floor or even both. This architectural element gives additional appeal and home value.
For a personalized touch, owners prefer custom-built moldings of their layout rather than purchasing ready-built ones. Owners are willing to spend much just to ensure that they would obtain the prospected outcome. However, with a fund just fit with your budget, you can still achieve similar results.
With that said, Cudjoe's Cabinets and Counters is the most budget-friendly custom molding service provider in Orlando, Florida. Just the right amount of money for a custom molding project? Worry not and talk to us.
Contact Cudjoe's Cabinets and Counters at (407) 863-9121 for a free consultation now.
Different Molding Types
Just new to this kind of project and don’t know what type of molding is appropriate to install and where to fix it? Don’t worry because we will guide you on choosing the right one by providing you with this list of most common yet popular moldings.
Casing – designed to conceal the unfinished gap between walls and door or window frames. The casing width normally spans two to three inches.
Baseboard – usually with a simple design with a touch of a small piece of semi-circular trim that ranges from very short pieces up to 6-inch tall boards. It adheres to the base of your walls that helps create a transition between walls and floors. It helps in hiding gaps between the bottom of the wall and the flooring as well.
Crown – contrary to the baseboard, it creates a smooth transition between the wall and the ceiling. It is also known as cornice moldings and produce a grand feeling when installed on tall ceilings.
Chair rail – also known as a dado rail, is the molding with the foremost function of protecting the walls from furniture, specifically from (dining) chairs. It can serve as a decorative molding too.
Picture or plate rail – this type of molding prevents damage to your walls by hanging your artwork frames in a picture rail rather than having nails driven to your walls. It adds uniformity in your illustrations through its consistent size.
Wainscoting – although not a trim, wainscoting is a paneling against a wall between the baseboard and the picture rail. Various wainscoting designs showcase a room’s overall style.
Batten – is a wall trim piece for hiding the joint between two pieces of paneling.
After choosing the type of molding, the next thing to consider is the type of material to be used. Whether it is metal, wood, or plastic, the choice of material is up to the practical and aesthetic purpose you go for. Nonetheless, for custom-built moldings, wood is the most preferred choice.
Reasons include durability and flexibility as well, so they’re easy to cut precisely according to your design. Wood trims are also fairly easy to remove if you want to replace them with something better. Wood moldings are a selection of light, delicate wood, corrosion- and wear-resistant, not split, good processing performance, material stability, cut smooth, paint, color, excellent adhesion, strong nail wood, and after dying treatment with mechanical or manual processing. Overall, wood molding has adornment and protective effects.
With many types of wood available, it’s hard to choose what to use for your wood moldings. Learning the difference between woods and its benefits helps you determine which one is good for purchasing that matches your molding patterns.
Choice of Wood for You
Softwoods vs. Hardwoods
Hardwoods, such as cherry and walnut, are the most common wood used for stain grade moldings and trims, for they absorb stain well. Hardwoods are more resistant to damage from collisions, children, and scratches from pets, thus commonly used for floor or door trim.
Whereas softwoods, such as pine or fir, are typically used for paint grade ones since they are generally less expensive and easy to work with. It’s a good choice for painted window trims or crown moldings where they are less likely to be affected.
Woods that stain well are oak, alder, cherry, lyptus, mahogany, softwoods such as douglas fir, cedar, ash, and hickory (still may show significant color variation through stain).
Woods best for a clear finish are hard maple, yellow birch, alder, lyptus, fir, cherry, red oak, cedar, white oak.
Woods sorted for color are hard maple, yellow birch, ash, hickory.
The woods mentioned above are just examples of the different factors which you may consider for selection. Do not think about it that much because Cudjoe's Cabinets and Counters is here to guide you so you could get the right wood for your custom molding.
Orlando, Florida’s Most Approachable Custom Molding Service Provider
Throughout Orlando, Cudjoe's Cabinets and Counters is the long-standing custom molding service provider that values our patrons and new consumers alike. With our amicable demeanor, costumers aren’t hesitant to forward their custom moldings queries. We have already offered our service to thousands of residents who come back now and then to work for them.
The most notable service we have is the budget-friendly factor that pushes clients to order custom moldings even with a sufficient fund only. It’s not a cheap nor expensive deal, but just the right amount yet of premium quality. In Cudjoe's Cabinets and Counters, we realize manual and virtual trim and molding layouts. We have a wide array of high-quality lumber selections fit for whatever is your chosen pattern and goal.
Our workers possess extensive knowledge in molding design and production, so skill is not a concern here. They are also flexible, so you can always discuss your plans with them and rest assured that it would be granted.
In Cudjoe's Cabinets and Counters, we do not only value our clients, but also the craftsmanship we extend to them.
Approach Us Now
Moldings draw residents and visitors to be fascinated with the interior feature. It increases the home value as well. Hence, most owners favor custom-built ones to add extra flavor. When opting for custom moldings, you need the help of professional workers to achieve what you want.
Cudjoe's Cabinets and Counters is always ready on the next line to discuss with you your custom molding proposals. Everything you’re concerned about will be attended to in the most effective way achievable.
Contact Cudjoe's Cabinets and Counters at (407) 863-9121 for a free consultation with a Custom Molding Expert in Orlando!